A range of MIG sets to suit all needs.
All wire feed units can be taken up to 30 metres away
from the power source.
CV
400 MIG SET
002001
The Lincoln
CV 400 is a dedicated MIG set, coupled with
the LN742 wire feed unit, which can be taken
up to 30 metres away from the power source.
Capable of handling most wires.
Amps
Volts
Input AC max Dimensions LxWxH Duty cycle
Weight
400DC
12 - 42 volts DC
28 kVA (38 Amps)/3 phase/400v
699 x 565 x 813mm
400 Amps 100% 500 Amps 60%
174 Kgs
DC
400 MIG SET
002005
A multi-process
machine, capable of MIG welding the full range
of wires, including Innershield. Also capable
of stick welding and air arc gouging. Coupled
with the LN9 GMA, which can be taken up to
30 metres away.
Amps
Volts
Input AC max Dimensions LxWxH Duty cycle
Weight
500DC
7 - 32 volts DC
34 kVA (47 Amps)/3 phase/400v
546 x 495 x 686mm 400 Amps
100% 500 Amps 60%
136 Kgs
PSS
5000 INVERTOR
037004
The PSS 5000,
when coupled with the FU 10 or FU 11, is capable
of MIG welding most wires. It can also be
used for AC/DC TIG or stick welding.
Amps
Volts
Input AC max Dimensions LxWxH Duty cycle
Weight
500DC
7 - 32 volts DC
29.3 kVA/3 phase/400v
840 x 360 x 610mm 400 Amps
100% 500 Amps 60%
126 Kgs (min)
LN
25 ADD ON MIG
002004
The LN25 add
on MIG unit will convert any DC welding power
source into a MIG set. This is only limited
by the length of the welding cables. It is
a versatile piece of equipment. Ideal for
non positional work or with the addition of
a CV set it is capable of positional work.
